• Accessories
  • Performance Accessories
  • Record Care
  • Turntables

Dynaudio Evoke 10 Loudspeakers


SKU: N/A Categories: , ,


Dynaudio Evoke 10 Loudspeakers

Plug them in, turn them up, and then get a friend round. We’d put money on your pal asking where’s the rest of the speakers. That’s when you smile, shrug and invite them to sit down in the sweet-spot on your sofa. And then turn it up a bit more.

Each speaker’s single 14cm long-throw mid/bass driver is made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades. They use new surrounds to extend their throw, their frequency response and their low-frequency dynamics – all while maintaining stellar midrange performance.

Want to know the woofer’s secrets? The diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil former directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange.

The 38mm voice-coil itself is made from aluminium, making it extremely light. That means we can use more windings. More windings gives us more control over the cone’s movement, which means more control over the sound – even at high volumes and high frequencies. It’s kept stable, centred and true by the Nomex spider (the circular spring assembly that stops the cone moving when it shouldn’t, and lets it move when it should).

And the whole assembly is driven by one of our new, powerful strontium carbonate Ferrite+ ceramic magnet systems.

New Cerotar tweeter

A brand-new 28mm Ferrite+ soft-dome tweeter inspired by Special Forty and Confidence


An ingenious resonance-defeating inner tweeter dome, trickled down directly from our most exclusive ranges

New Esotec+ Woofer

A long-throw 14cm one-piece MSP design with an aluminium voice-coil and strontium carbonate Ferrite+ ceramic magnet


High-grade Dynaudio topology with select components – just like all of Dynaudio’s high-end hi-fi speakers

Danish design

Timeless, honest and beautiful: subtly curved MDF with hidden screws and four beautiful, clean finishes


Additional information


Walnut Wood, Blonde Wood, Black High Gloss, White High Gloss

Technical Specification

Sensitivity: 84dB (2.83V/1m)

IEC power handling: 160W

Impedance: 6 Ω

Frequency response (±3dB): 47Hz – 23kHz

Box principle: Bass reflex rear ported

Crossover: 2-way

Crossover frequency: 1400Hz

Crossover topology: 2nd order

Woofer: 14cm MSP cone

Tweeter: 28mm Cerotar with Hexis

Weight: 6.7kg/ 14.8lb

Dimensions (W x H x D): 180 x 315 x 277mm

7.1 x 12.4 x 10.5in

Dimensions with feet/grille (W x H x D): 180 x 315 x 277 

7.1 x 12.4 x 10.9in

Ceritech Audio